With 2000 lumens the BUSTER 2000 HL is your power light for perfectly illuminated trails. The powerful Battery Pack and the super-light Remote with fluorescent buttons are included. With a burning time of between 2.5 and 20 hours, the helmet light is your indispensable companion for every night ride
As the name suggests, 2000 lumens are contained in the BUSTER 2000 HL power package. And this with a burning time of up to 20 hours. Three CREE LEDs ensure constant light output for perfectly illuminated trails and paths
Seven light modes
With seven different modes, the lighting intensity can be ideally regulated. The four continuous light modes "Eco" (300 lumen), "Standard" (600 lumen), "Power" (1300 lumen) and "High Power" (2000 lumen) allow the driver to choose the burning time. For more attention on the trail the three flashing modes "Flash", "Pulse" and "SOS" serve
Two holder systems are included in the scope of delivery. The universal helmet holder adapts flexibly to all common helmet models. In addition, there is an adapter that can be connected to the holder of Action Cams.
The BUSTER 2000 HL is even easier to operate with the 14 gram light and compact Remote. Particularly practical when the light is attached to the helmet. The wireless remote control is quickly attached to the handlebars via an O-ring and can be found quickly even in the dark thanks to fluorescent keys. It operates with an interference-free 2.4 GHz signal.
Battery Pack = Powerbank
The Panasonic cells built into the battery pack provide an output of 6400 mAh. The current charge status of the battery can be directly read off via the four-stage indicator. A USB port also allows you to charge other devices such as a bike computer or smartphone.
The BUSTER 2000 HL owes its timeless and elegant design to the anodised aluminium housing. The surface is also resistant to scratches
Glow in the dark
Both the control button of the lamp and the two large buttons of the wireless remote fluoresce and can therefore be easily seen in the dark.
Practical plug-in system
The design of the plug-in connection has been improved and simplifies the separation and connection of light and battery pack. This significantly reduces the risk of cable breaks.
Power to go
The silicone holder with the two silicone straps ensures fast, secure and above all scratch-free attachment of the battery pack to the frame.
At the touch of a button you can see the current state of charge of the battery pack. The four LEDs each indicate 25% of the capacity. Other devices can also be charged via the USB port.
Double-click the upper button to switch on the BUSTER 2000 HL. The helmet light is switched off again by holding the button down for a longer time. Use the upper keys to change between the three flashing modes. The lower button switches through the four continuous light modes.