-
100 días para devoluciones gratuitas
-
Envío gratis en productos pequeños a partir de 75 €6
-
40.000 artículos 400 marcas
Lo sentimos mucho, pero lamentablemente no contamos con un texto en español por el momento.
The PRO TRAXION progress capture pulley was designed to allow rope installation while the pulley is connected to the anchor. With its large diameter sheave and great efficiency, it is particularly appropriate for hauling heavy loads on big walls. The side plate locks when loaded and prevents opening of the pulley during use.
Información adicional
- Rope can be inserted into the pulley attached to the fixed point
- especially suitable for retightening heavy loads
- large aluminium roller with encapsulated ball bearing
- Side part is locked under load
- lower fastening eye for setting up different types of pulley blocks
- serrated clamping cam with cleaning slot
- Use as a loose roller by locking the clamping mechanism in the open position
- Certification EN 567, UIAA
- Cable diameter min.: 8 mm, max.: 13 mm
- 38 mm Diameter of sheave
- 2 x 2,5 = 5 kN service load
- 2 x 11 = 22 kN breaking load
- 2.5 kN Service load of the return roller with backstop
- 4 kN Breaking load of the return roller with backstop
- 95 % Efficiency
Peso: 265 g